SuspensionMAXX SMX-122790EX Extreme Duty Sway Bar End Links for 2006-2010 Ram 4x4 2500/3500 Mega Cab W/4"+ Lift 9" Center to Center
Extreme Duty Sway Bar End Links for 06-2010 Ram 4x4 2500/3500 Mega Cab Lifted 4 Inch or More Center to Center of 9.0 inch SuspensionMAXX Sway Bar End Links - Tighten Your Handling, Extend Your Suspension Life. Your sway bar is only as good as its connection points.
Our Sway Bar End Links are built tough to eliminate flex, reduce body roll, and restore precision handling - especially on lifted or high-mileage trucks.
Why more truck owners rely on SuspensionMAXX Sway Bar End Links:
- Improves Cornering Stability: Reduces sway and body roll during turns, lane changes, and towing.
- Restores Proper Suspension Geometry: Keeps your sway bar functioning as intended, especially on lifted trucks.
- Heavy-Duty Construction: Made from high-strength components that outperform factory links in harsh conditions.
- Adjustable Length Options Available: Fine-tune your setup for different lift heights and suspension setups.
- Bolt-On, No Hassle Install: Direct-fit replacements for most trucks - installs with basic tools.
If your truck leans more than it should or you're upgrading your suspension, SuspensionMAXX End Links give you the tight, confident ride your chassis deserves.
SuspensionMaxx Is Proud To Introduce Our Extreme Duty Sway Bar Links. Designed For Lifted Dodge Ram Trucks That Do Not Use A Sway Bar Relocation Brackets.
The Extreme Duty Sway Bar Links Are Based Off Our Original Patented Design But Utilize A 33 Percent Larger and 50 Percent Stronger Configuration For Lifted Applications. The Higher Roll Center Of Lifted 2500 and 3500 Trucks Puts Higher Dynamic Loads On The Stabilizer Links. Having A Strong Sway Bar Link That Can Handle These Extreme Loads Without Breaking Is Critical.
The Extreme Duty Sway Bar Links Are Built For These Conditions. Extreme Duty Sway Bar Links For 2006-2010 Dodge Ram 2500/3500 With Approximate 5.0 Inch Of Lift.
9.0-Inch Center to Center Sold In Pairs. Wear Prone Stock Ball Socket Is Replaced With A Long-Lasting, Simple and Robust Design. Thermoplastic/Urethane Bushings Perform Better and Last Longer Than Original Equipment Rubber Design.
Features Include
- 4140 Alloy Steel Eyelets, Drawn Over Mandrel Steel Tubing and Grade 8 Bolts.
- Direct Replacement For OE Sway Bar End Links-Measures 9.0 Inch Center To Center.
- Maintenance-Free, Corrosion Resistant, and Wont Squeak Or Rattle.
- Excellent SuspensionMaxx Customer Service and Technical Support.
- 100 Percent American Made and Covered By The Limited Warranty.
SMX-1227 Are Engineered To Directly Replace The Stock Sway Bar Links On 2006-2010 Ram 4X4 2500/3500 Including Mega Cab Models.
Heavy Duty Sway Bar End Links Are Your Solution To Weak Original Equipment Sway Bar Links.
Instead Of Using A Ball and Socket Design That Is Prone To Rust and Deterioration, We Implement A Rubber Bushing That Provides Needed Articulation Without Corrosion and Premature Wear.
Remain Tight and Free Of Play Much Longer Than The Stock Links, and They Wont Rattle Over Bumps. Rather Than Frequently Replacing Your Oe Links, Enjoy The Cost Efficiency Of Long Lasting sway bar links.
Heavy Duty Sway Bar End Links Use Thermoplastic/Urethane Bushings To Perform Better and Last Longer Than The Original Equipment Ball-In-Socket Design.
Eyelet Links Are Manufactured With Ultra-High Strength 4140 Treated Alloy Steel and Electroplated With Yellow Zinc Dichromate For Corrosion Resistance.
Shaft Sections Are Made From Drawn Over Mandrel Steel Tubing and Grade 8 Bolts For Durability. SMX-1227 Also Features An Extra Heavy Duty Mounting Links Which Are Required For This Application.
Maintenance Free Come Complete With Stainless Steel Washers and Locking Fasteners.
Can Be Used As High-Quality Replacement Parts Or As A Preventative Maintenance Measure.
Heavy Duty Sway Bar End Links Simply Replace Original Equipment Sway Bar End Links. No Drilling Is Required. Installation Takes Just Forty Five Minutes To An Hour and Is Supported By The SuspensionMaxx Technical Support Program.
SMX-1227 Directly Replaces Dodge Part Number 68001734Ab. 100 Percent Manufactured In The Us and Covered Under The Limited Warranty.
Details:
- Fits 2006-2010 Dodge Ram 2500, 2006-2010 Dodge Ram 3500
- Position Front
- Drive Type 4X4
- Material 4140 treated alloy steel
- Center to Center Measurement 9.0 inch
- Bushing Material Thermoplastic/urethane
- Bolt Grade 8
- Bolt Size 0.5 inch
- Sold As Kit
- Quantity Per Kit 2 Sway Bars
Notes
Images provided by manufacturer and may not be exact SKU. Limited Warranty. Made in the USA. Sold as a Pair. Made from 4140 Heat-Treated Alloy Steel.