SuspensionMAXX SMX-122775 Sway Bar End Links Heavy Duty for 2006-2010 Ram 4x4 2500/3500 Mega Cab W/4"+ Lift 7.5" Center to Center
Sway Bar End Links Heavy Duty for 06-2010 Ram 4x4 2500/3500 Mega Cab Lifted 4 Inch or More Center to Center Measurement of 7.5 Inch SuspensionMAXX Sway Bar End Links - Tighten Your Handling, Extend Your Suspension Life. Your sway bar is only as good as its connection points.
Our Sway Bar End Links are built tough to eliminate flex, reduce body roll, and restore precision handling - especially on lifted or high-mileage trucks.
Why more truck owners rely on SuspensionMAXX Sway Bar End Links:
- Improves Cornering Stability: Reduces sway and body roll during turns, lane changes, and towing.
- Restores Proper Suspension Geometry: Keeps your sway bar functioning as intended, especially on lifted trucks.
- Heavy-Duty Construction: Made from high-strength components that outperform factory links in harsh conditions.
- Adjustable Length Options Available: Fine-tune your setup for different lift heights and suspension setups.
- Bolt-On, No Hassle Install: Direct-fit replacements for most trucks - installs with basic tools.
If your truck leans more than it should or you're upgrading your suspension, SuspensionMAXX End Links give you the tight, confident ride your chassis deserves.
Custom For 2006-2010 Ram 4X4 2500/3500 Including Mega Cab Lifted 4.0 Inch or More Center To Center Measurement Of 7.5 Inch Sold In Pairs. Wear Prone Stock Ball Socket Is Replaced With A Long-Lasting, Simple and Robust Design.
Thermoplastic/Urethane Bushings Perform Better and Last Longer Than Original Equipment Rubber Design. Features Include 4140 Alloy Steel Eyelets, Drawn Over Mandrel Steel Tubing and Grade 8 Bolts.
Extended Length For Suspension That Has Been Lifted 4.0 Inch Or More-Measures 7.5 Inch Center To Center. Maintenance-Free, Corrosion Resistant, and Wont Squeak Or Rattle. Excellent SuspensionMaxx Customer Service and Technical Support.
SMX-122775 Are Engineered To Fit 2006-2010 Ram 4X4 2500/3500, Including Mega Cab Models, That Have Been Lifted 4.0 Inch or More With A Center To Center Measurement Of 7.5 Inch, The Links Are Extended In Length To Compensate For Increased Suspension Height.
Custom Heavy Duty Sway Bar End Links Are Your Solution To Weak Original Equipment Sway Bar Links. Instead Of Using A Ball and Socket Design That Is Prone To Rust and Deterioration, We Implement A Rubber Bushing That Provides Needed Articulation Without Corrosion and Premature Wear.
Remain Tight and Free Of Play Far Longer Than The Stock Links, and They Wont Rattle Over Bumps. Rather Than Frequently Replacing Your Oe Links Enjoy The Cost Efficiency, and Proper Fit, Of Long Lasting sway bar links.
Custom Heavy Duty Sway Bar End Links Use Thermoplastic/Urethane Bushings To Perform Better and Last Longer Than The Original Equipment Ball-In-Socket Design. Eyelet Links Are Manufactured With Ultra-High Strength 4140 Treated Alloy Steel and Electroplated With Yellow Zinc Dichromate For Corrosion Resistance.
Shaft Sections Are Made From Drawn Over Mandrel Steel Tubing and Grade 8 Bolts For Durability. SMX-122775 Also Features An Extra Heavy Duty Mounting Links Which Are Required For This Application.
Maintenance Free Come Complete With Stainless Steel Washers and Locking Fasteners.
Leveled Heavy Duty Sway Bar End Links Simply Bolt In Place-No Drilling Is Required. Installation Takes Just Forty Five Minutes To An Hour and Is Supported By The SuspensionMaxx Technical Support Program.
100 Percent Manufactured In The Us and Covered Under The Limited Warranty.
Details:
- Fits 2006-2010 Dodge Ram 2500, 2006-2010 Dodge Ram 3500
- Position Front
- Drive Type 4X4
- Material 4140 treated alloy steel
- Center to Center Measurement 7.5 inch
- Bolt Grade 8
- Sold As Kit
- Quantity Per Kit 2 Sway Bars
Notes
Images provided by manufacturer and may not be exact SKU. Limited Warranty. Made in the USA. Sold as a Kit. Made from 4140 Heat-Treated Alloy Steel.