Spohn C10-SBK1 Pro-Touring 32mm Front & 25mm Rear Sway Bar Set 2010 2011 2012 2013 Camaro

The 2010+ Chevrolet Camaro suffers from significant understeer and body roll. Spohn Performance Pro-Touring sway bars are the single biggest handling improvement you can make to your Camaro! Our sway bars dramatically reduce body roll and wheel hop while increasing cornering capability and steering response. Don't skimp on the foundation of your suspension!

Spohn Pro-Touring sway bars are larger & stronger 32mm (1.25") diameter front and 25mm (1.00") diameter rear lightweight tubular sway bars to reduce body roll and provide predictable handling (matched sizing for balanced handling). Compared to the factory's (SS) .900" front and .865" diameter rear sway bars our sway bar set really puts the Camaro "on rails", it's a night and day difference in handling performance. Our rear sway bar's three end link attachment points allow you to dial in the way the car responds to throttle steer and driver input.

Our sway bars are one piece CNC formed from ST52.3 DOM alloy steel. This alloy material provides a tensile strength of 85,000 psi and a yield strength of 75,000 psi providing for extremely strong, yet lightweight tubular sway bars. This entire sway bar kit weighs only 20.85 pounds. Our front sway bar is 1.25" o.d. x .250" wall and our rear sway bar is 1.00" o.d. x .156" wall. The coins are hot pressed in one operation for a seamless and extremely strong end link connection. Unlike the stock sway bars and many from our competitors our sway bars are sealed from water and debris.

Our sway bar set includes fluted polyurethane bushings with silver zinc plated bushing shells. The sway bars also include chrome plated shaft collars that lock in the bar's lateral position to prevent any side to side movement. The entire assembly is a 100% bolt-in installation. Sway bars are available powder coated in your choice of the colors below for a brilliant and durable finish.

Specifications:

• 32mm (1.25") diameter x .250" wall CNC bent lightweight alloy steel tubular front sway bar (210% stiffer than OEM)
• 25mm (1.00") diameter x .156" wall CNC bent lightweight alloy steel tubular rear sway bar three-way adjustable (+80, 120, 170% stiffer than OEM)
• Fluted polyurethane bushings with silver zinc plated bushing shells included
• Chrome plated clamp-on shaft collars included to keep the sway bars' lateral positioning locked
• Durable and brilliant powder coated finish in your choice of the above colors
• 100% direct bolt in installation - no drilling or modifications required!

Notes

End Links: Spohn sway bars can be used with the factory end links or you can choose to add  Spohn Extreme Duty End Links (Sold Separately) Part #SPI-C10-FEL (Front) and #SPI-C10-REL (Rear) for the ultimate in adjustability, strength and handling performance.

WARNING: Cancer and/or Reproductive Harm — www.P65Warnings.ca.gov

Scroll to view product options.

Scroll to view product options.

Fits These Applications: