Wilwood 140-14940 Forged Dynapro Radial 11.75" Front Race Big Brake Kit With Slotted Rotors and Gray Anodized Calipers, Fits 1990-2013 Honda & Acura Models With OE 262mm Rotors
This kit is configured for dedicated road racing on all 1990-2001 Acura Integra 4 lug models, and the various model Honda Civics, CRX’s, Del Sols, and Fits, and that are equipped stock, or have been upgraded to use the large bearing hubs and OE spindles that originally used the 262mm / 10.32” diameter rotors. It requires 15” wheels designed with additional inside clearance to accommodate the larger than stock brake package. The four piston DPR/ST radial mount calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec hard anodized, medium gray color finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are sized for compatibility with OE power brake boosters equipped with the larger 15/16” to 1.00” bore master cylinders, and are easily configured with manual brake conversions and balance bar pedals using appropriately sized master cylinders. Spec37 alloy, GT competition series 11.75” diameter directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats. Unsprung and rotating weight are minimized while providing high cooling efficiency and rugged durability with thermal stability in sustained high heat competition. Mounting brackets, including all premium grade fasteners, secure the calipers in the stock location without modifications. This race winning system is completed with high temperature, high friction, endurance compound race pads selected specifically by application. This brake kit does not include brake lines. Wilwood Flexline brake lines are necessary to complete the installation of the kit and must be ordered separately. See below for brake line kit options:
Wilwood Flexline Kit for 2007-2013 Honda Fit # WIL-220-11790
Wilwood Flexline Kit 2001-2005 Acura EL, 2001 Integra, 2001- 2005 Civic # WIL-220-6860
Wilwood Flexline Kit 1990-2000 Integra, 1990-2000 Civic # WIL-220-6420
*This Brake Kit may require 15-inch or larger wheels and/or wheel spacers. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel.
**This kit requires spindles from vehicles originally equipped with 262mm (10.32") diameter rotors.
This kit fits the following vehicles:
Acura EL 2001-2005 Acura Integra 1990-1996 Acura Integra 1997-2001 Honda Civic 1990-2000 Honda Civic 1992-1995 Honda Civic 1993-1995 Honda Civic 1994-1995 Honda Civic 1996 Honda Civic 1996-2000 Honda Civic 1999-2000 Honda Civic 2001-2003 Honda Civic 2002-2003 Honda Civic 2004 Honda Civic 2004-2005 Honda Civic 2005 Honda Civic del Sol 1994 Honda Civic del Sol 1995-1997 Honda Fit 2007-2013 Honda Fit 2008-2013 Honda Fit 2012 Honda Fit 2012-2013
Notes
1. This kit requires spindles from vehicles originally equipped with 262mm (10.32") diameter rotors.
2. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
3. This Brake Kit requires 15-inch or larger wheels with additional inside clearance to accommodate the larger than stock brake package. Please refer to the wheel clearance diagram image below for requirements.
WARNING: Cancer and/or Reproductive Harm — www.P65Warnings.ca.gov