Wilwood Rear Race Big Brake Kit Combo With Brake Lines & Fluid for 2024+ Can-Am Maverick X3 6-Lug

Wilwood Rear UTV RACE Big Brake Kit Combo with Gray Ano Calipers, Plain Rotors & Brake Fluid for 2024-Up Can-Am Maverick X3 6-Lug

This ACCESSPEED-WIL-UTV-CAN24RACE-C is an all-inclusive Rear Racing Big Brake Kit with 2 Bottles of Wilwood 570 Brake Fluid!

Accesspeed is excited to offer Wilwood’s racing big brake kits for the Can-Am Maverick X3 UTV. Wilwood’s rear UTV Race brake kits feature dynamically-mounted rotors and upgraded calipers for popular side-by-side machines. These Race Brake Kits combine radial-mount multi-piston calipers for greater clamping force, BP-28 (high-friction) brake pads, and large-diameter floating rotors for more brake torque to improve braking on higher-powered UTVs. Radial-mount NDPR four-piston calipers use larger dynamically-mounted steel floating rotors to reduce piston knockback and improve thermal capacity. Durable steel rotors are up to 20% greater in diameter and thicker for less distortion. Dynamically mounted rotors reduce thermal stress and prevent piston knockback from rough terrain.

Wilwood’s specially formulated Hi-Temp° 570 Racing Brake Fluid has a minimum 570° F dry boiling point to withstand the severe heat requirements of automotive racing. Hi-Temp° 570’s low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal. Hi-Temp° 570 comes in convenient 12 ounce containers hermetically sealed to guarantee against unwanted absorption of moisture which can drastically lower the fluids boiling point (fluid from larger containers tends to become contaminated with moisture, lowering its boiling point and making it unsuitable for racing applications).

The braking performance increase Accesspeed has seen is undeniable!

KIT FEATURES:

• Larger, thicker, dynamically mounted 11.60” x 0.25” steel rotors eliminate knockback and reduce thermal distortion; available plain face or drilled.
• Wilwood Narrow DynaPro four piston radial mount calipers with strengthened body reduces deflection and increases clamping efficiency.
• NDPR calipers offered in gray-ano finish or 24 additional caliper color options. (Additional charges apply for custom colors)
• Race-spec kits use Type III hard anodized calipers and more aggressive, fade-free BP-28 brake pads, banjo bolt and crush washers to connect to factory lines on most models.
• Fully compatible with factory master cylinder, ABS, and pedals.
• Kits fit most wheels 14” and larger.

Notes

*This Brake Kit may require 14-inch or larger wheels and/or wheel spacers. Please refer to the wheel clearance diagram PDFs to verify wheel to caliper clearance.

WARNING: Cancer and/or Reproductive Harm — www.P65Warnings.ca.gov

Scroll to view product options.

Scroll to view product options.

Fits These Applications: