Wagner Tuning WT22722 OBD2 Cable for MFD15 GEN2

Wagner Tuning WT22722 OBD2 Cable for MFD15 GEN2

Wagner Tuning Display OBD 2 Cable Kit for MFD15

With our OBD 2 Cable Kit, you'll get the perfect accessory for Wagner Tuning MFD15 displays. This OBD 2 cable allows you to display OBD 2 values on your display.

Finally, the OBD2 cable for Wagner Tuning Dsiplay displays is available! Installation takes just a few minutes, and you can conveniently read all OBD 2 values on your display. Even stored fault codes are displayed!

Simply use the pre-configured OBD TRI files to easily display the values. This way, you have all the important information right at your fingertips.

Here are the key facts about the OBD 2 Cable Kit:

OBD connector with a 2-meter cable for connection to MFD15 The following pins are connected from the OBD connector to the display: Power supply, Ground (Pin 4+5), Can High (Pin 6), Can Low (Pin 14) The power cable is separately led out from the connector (approx. 15 cm) and must be connected to a free fuse slot in the fuse holder. If all slots are occupied, a standard and mini adapter are included in the delivery. Our OBD 2 Cable Kit supports all OBD 2 values output by the control unit. You can display up to 64 values on your display, allowing you to gather even more information about your vehicle.

The package includes:

• 2-meter (6ft 6in) OBD 2 cable with Connector B and Connector C for the display


• Standard + Mini fuse adapters


 

Order our OBD 2 Cable Kit now and expand the functionality of your Wagner Tuning display. Get all the relevant vehicle data on your display and always stay in control.

WARNING: Cancer and/or Reproductive Harm — www.P65Warnings.ca.gov

Scroll to view product options.

Scroll to view product options.

Fits These Applications: