Shop By Vehicle
Year
Make
Model
Body
Engine

Wilwood SL6R Front 14" & Rear 13" Brakes, Black, Drilled, Lines, Fluid, 2.36" O/S, 1965-67 Mustang

Wilwood SL6R Front 14" & Rear 13" Brakes, Black, Drilled, Lines, Fluid, 2.36" O/S, 1965-67 Mustang
Part Number: WIL-MUS65-DS-14-J
Brand: Wilwood
List Price: $5,496.00
Price: $4,399.00

This product qualifies for Free Ground Shipping*
Qty

Wilwood Superlite 6R-DS 14" Front Dust Seal & Superlite 4R 12.88" Rear Big Brake Kit With Black Calipers Drilled Rotors Stainless Brake Lines Parking Brake Cable & Brake Fluid 1965 1966 1967 Ford Mustang With Factory Disc or Drum Front & Large Flange 2.36" Offset Rear

This is an all-inclusive Front & Rear Brake Kit, WITH Front & Rear Stainless Brake Lines, Rear Parking Brake Cable Kit, and 2 Bottles of Wilwood 570 Fluid!

FRONT:

FNSL6R-DS Billet Forged six-piston calipers with 14” rotors deliver the ultimate combination for braking power and style in this group of kits engineered for traditional non-ABS spindles on American muscle cars and vintage rods. Built exclusively for 18” and larger wheels, FNSL6R-DS kits enhance tire and suspension upgrades on all types of custom show and high performance dual-purpose street and track machines. The Forged Narrow Superlite 6R Dust Seal (FNSL6R-DS) is our newest version for the venerable Superlite caliper series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. The addition of Wilwood’s exclusive wiper dust seal allows these calipers to be used in areas that may mandate environmental sealing. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. 

 

REAR:

Forged Narrow Superlite 4R rear disc kits provide the ultimate Big Brake solution for popular muscle car rear axles that require a parking brake. FNSL4R four piston calipers, 12.88” two-piece rotors, and high performance BP-10 compound pads provide optimized and balanced braking to compliment front big brake upgrades on all types of custom, show and high performance street machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Optional caliper finishes and rotor designs allow builders to personalize the style and performance for every application.

 

BRAKE LINES:

Wilwood’s stainless steel braided Flexlines are manufactured to the highest quality standards, and are designed to fit each application.  This kit inlcudes 14" front & rear brake line kits. These premium grade Flexlines are durable and provide “hard line” pedal feel, while allowing braided line heat dissipation.

 

PARKING BRAKE CABLE KIT:

This Parking Brake Cable Kit is for Wilwood Rear Big Brake Kits.  Wilwood’s Caliper Cable Kit contains all parts necessary for effective installation on most vehicles. Kit contents include cable and sheath assemblies, clevises and hardware.

 

BRAKE FLUID:

Wilwood’s specially formulated Hi-Temp° 570 Racing Brake Fluid has a minimum 570° F dry boiling point to withstand the severe heat requirements of automotive racing. Hi-Temp° 570’s low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal. Hi-Temp° 570 comes in convenient 12 ounce containers hermetically sealed to guarantee against unwanted absorption of moisture which can drastically lower the fluids boiling point (fluid from larger containers tends to become contaminated with moisture, lowering its boiling point and making it unsuitable for racing applications).

 

*This Brake Kit may require 18-inch or larger wheels and/or wheel spacers. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel.v


Notes

Black Calipers. Please see additional listings for Red Calipers. Installation of Wilwood Disc Brake Kits may affect the wheel offset and will require a larger diameter wheel for caliper clearance. All returned orders are subject to a re-stocking fee, so please make sure your wheels will work before ordering. Shipping Promotions are valid in the Lower 48 States only.  For all other areas, please contact us for a discounted rate quote.

Prop 65 Warning WARNING: Cancer and/or Reproductive Harm — www.P65Warnings.ca.gov

Scroll to view product options.

Part # Description Price
WIL-MUS65-DS-14-J Wilwood SL6R Front 14" & Rear 13" Brakes, Black, Drilled, Lines, Fluid, 2.36" O/S, 1965-67 Mustang $4,399.00 Add to Cart

Scroll to view product options.

Fits These Applications:

Year Make Model SubModel Engine Transmission Drive
1967 Ford Mustang - Convertible 3.3 RWD
1967 Ford Mustang - Convertible 4.7 RWD
1967 Ford Mustang - Convertible 6.4 RWD
1967 Ford Mustang - Fastback 3.3 RWD
1967 Ford Mustang - Fastback 4.7 RWD
1967 Ford Mustang - Fastback 6.4 RWD
1967 Ford Mustang - Hardtop 3.3 RWD
1967 Ford Mustang - Hardtop 4.7 RWD
1967 Ford Mustang - Hardtop 6.4 RWD
1967 Ford Mustang Shelby GT350 - Fastback 4.7 RWD
1967 Ford Mustang Shelby GT500 - Fastback 7.0 RWD
1966 Ford Mustang - Convertible 3.3 RWD
1966 Ford Mustang - Convertible 4.7 RWD
1966 Ford Mustang - Fastback 3.3 RWD
1966 Ford Mustang - Fastback 4.7 RWD
1966 Ford Mustang - Hardtop 3.3 RWD
1966 Ford Mustang - Hardtop 4.7 RWD
1966 Ford Mustang Shelby GT350 - Fastback 4.7 RWD
1965 Ford Mustang - Convertible 4.3 RWD
1965 Ford Mustang - Convertible 4.7 RWD
1965 Ford Mustang - Fastback 4.3 RWD
1965 Ford Mustang - Fastback 4.7 RWD
1965 Ford Mustang - Hardtop 4.3 RWD
1965 Ford Mustang - Hardtop 4.7 RWD
1965 Ford Mustang Shelby GT350 - Fastback 4.7 RWD
1964 Ford Mustang - Convertible 4.3 RWD
1964 Ford Mustang - Convertible 4.7 RWD
1964 Ford Mustang - Fastback 4.3 RWD
1964 Ford Mustang - Fastback 4.7 RWD
1964 Ford Mustang - Hardtop 4.3 RWD
1964 Ford Mustang - Hardtop 4.7 RWD