Zone F10 6-Inch Suspension Lift Kit 2009-2014 Ford F-150 4WD

Zone F10 6-Inch Suspension Lift Kit 2009-2014 Ford F-150 4WD

Choose the Zone Offroad 6" Suspension System to lift your 2009-2013 Ford F150 and clear up to a 37" tire. Competitors will tell you how they maintain the factory ride, but Zone Offroad has stepped up the game by including new coil-over struts custom valved for larger tires, improved ride, and optimal handling. A 3-point differential mounting system drops and rotates the front differential to bring the CV shafts and driveshaft back to factory operating angles.

Visually compare the Zone Offroad porterhouse knuckles to the chuck roast of the competition. Salivate over the fully cast, CNC machined, and resonant frequency tested knuckles that correct the tie rod and ball joint geometry with no track width change. Heavy main crossmembers are included with your meal and are locked solid with a differential skid plate.

Choose your style of rear shock, and we'll fill in the rest with a 5" dual pin block kit that offsets the axle closer to the center of the wheel well compared to a standard setup.

This kit is all inclusive, so don't look anywhere else, install a Zone Offroad system on your F150 and have no regrets.

The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well.

FEATURES:

• Custom Valved Replacement Coil-over Strut
• CNC Machined Steering Knuckles correctly drilled for the application
• Heavy 1/4" thick crossmembers
• No Track Width Change
• Differential Skid Plate Included
• Installation skill level: 3 of 5
• Estimated install time: 8 hrs
• Max tire size: 37 x 12.50 See Instructions
• Wheel size: 18x9, 20x9
• Back spacing: 4.5-5.5"

Notes

NOTES:

• AWD models will require front driveshaft modificaiton
• Will not work with 17" wheels
• If using 18x9 wheels with 5-5.5" backspace, fit the wheels before mounting to check for proper tie rod clearance. Wheel manufacturing variances may affect this clearance.
• Vehicles equipped with factory powersteps will require E-Brake Relocation Bracket F5608 listed in the accessories.

WARNING: Cancer and/or Reproductive Harm — www.P65Warnings.ca.gov

Scroll to view product options.

Scroll to view product options.

Fits These Applications: